DON'T FORGET YOU NEED VERSION 2 SOFTWARE AND THE CORRECT SATELLITE ADAPTOR!
This is how the BeastX Manual explains:
To bind a satellite receiver, it must be connected via the adapter to the MICROBEAST. Insert a
Spektrum® "Bind plug" in the [SYS] slot and turn on the power. The receiver is now (flashing LED on the receiver) in bind mode and can be bound to the transmitter. In cases where power is supplied exclusively by the [SYS] Connection, to bind a Spektrum® satellite receiver, the power supply must be provided temporarily through any of the servo port (CH1 - CH5). We recommend combining this operation simultaneously with the setting of the receiver type as described in Section 4.1. Do not forget to remove the „Bind plug“ after the bind operation. It makes no difference if you pull off the „Bind plug“ during the binding process or leave it connected. The failsafe adjustment is
made through a separate receiver menu point and not as for some Spektrum® receivers during the
binding process
IF THIS STILL DOES NOT WORK, PLEASE SEARCH IT IN THE BEASTX FORUM: http://www.beastx.com/forum.html
